Policy Routing on Catalyst 3560

Unanswered Question
Jun 25th, 2007
User Badges:

PBR is configured on a Cisco Catalyst 3560 Switch.

The Switch is running with c3560-ipservices-mz.122-25.SEE2/c3560-ipservices-mz.122-25.SEE2.bin" Image. However while applying the PBR on the vlan interface, though it takes the command.

However the command doesn't get applied on the vlan interface ( show running)

Does SDM prefer routing command will resolve the problem or is there any other solution.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
mohammedmahmoud Mon, 06/25/2007 - 23:48
User Badges:
  • Green, 3000 points or more


Your IOS supports PBR as per the Cisco feature navigator, and thus it should work, have you "ip routing" configured.


Mohammed Mahmoud.

royalblues Tue, 06/26/2007 - 00:12
User Badges:
  • Green, 3000 points or more

I think you would require the SDM prefer routinmg command to use policy routing



This Discussion