CallManager MoH limitations

Unanswered Question
Jun 26th, 2007
User Badges:

I have a customer who is receiving the following error message from his single server deployment: Number of MediaListExhausted events exceed 0 within 60 minutes.


Any idea if he is reaching a limitation on unicast MoH streams or is this caused by something else?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
neesharm Tue, 06/26/2007 - 09:40
User Badges:
  • Bronze, 100 points or more

Check if the users dialing incorrect numbers often ( a number which does not exists )


Unless you are receiving reports that outbound calls are not

completing you can choose to ignore them


Medialist exhausted means that callmanager has gone through all devices

in the Media Resource Group and was not able to assign a device to use.




Now, if you want to stop receiving these messages, you can log in to RTMT and click on

the Alert Menu> Set alert properties>select the alerts you are getting and uncheck

the Enable Alert box or selecting the alert type, for example, MediaListExhausted and

clcik next, then you will be able to configure a Threshold to trigger the alert only when

the number of MediaListExhausted events exceed a certain number within an hour. This will

reduce the number of alters you are getting.



Actions

This Discussion