cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
595
Views
0
Helpful
2
Replies

FWSM IOS & ASDM IOS Upgrade

loufed
Level 1
Level 1

I successfully updated the IOS on FWSM from 2.3 to 3.2(1). At the same time, I loaded the new ASDM IOS asdm-521f.bin.

After reloading the FWSM's, I am receiving the following:

FWSM Firewall Version 3.2(1)

Detected an old ASDM version.

You will need to upgrade it before using ASDM.

I thought that once the new asdm-521f.bin was copied to flash:asdm that the reload would automagically read the new ASDM.

What am I missing?

2 Replies 2

b.hsu
Level 5
Level 5

For the latest 3.1 image on the FWSM, the required ASDM image is 5.0F. However this is not bundled in the 3.1 code. It will be available seperately to download on the FWSM

jonathanstevens
Level 1
Level 1

With the upgrade to 3.2(1) you need to upload the new ASDM AFTER the reload into the new FWSM image (not before).

If you reload the new ASDM it will work just fine (you don't need to reload the FWSM).

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: