Solved: NTP on MPE

jones2sr · ‎06-26-2007

How do you configure/start NTP on Meeting Place Express? I keep having to reset the time. Today it was 20 minutes behind and caused all kind of havoc. :P

Thanks

thisisshanky · ‎06-26-2007

Jones,

From MPX desktop or remote ssh into a shell session on MPX server. Type "net".

A menu with lot of options will show up and then you can choose option 8 to configure NTP service.

Once you change the settings, save it when the menu prompts and reboot the server.

HTH

Sankar

PS: please remember to rate posts!

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

View solution in original post

thisisshanky · ‎06-26-2007

Jones,

From MPX desktop or remote ssh into a shell session on MPX server. Type "net".

A menu with lot of options will show up and then you can choose option 8 to configure NTP service.

Once you change the settings, save it when the menu prompts and reboot the server.

HTH

Sankar

PS: please remember to rate posts!

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

david.mackill · ‎09-15-2008

I have done this and it still is not syncing. I can ping the NTP server from the MPX server

I have checked the /etc/ntp.conf and it shows the ntp server listed there as well.

lstoked · ‎04-28-2009

Did you ever get the ntp to sync on mpe?

david.mackill · ‎04-28-2009

Yes - we had to log a TAC case to resolve this in the end. We also had to update the MPE version.