06-26-2007 06:04 PM - edited 03-03-2019 05:37 PM
Hello everybody;
i have enabled per-destination load balancing, and CEF for sake of my applications as follow :
ip cef load-sharing algorithm include-ports source destination
it works very well. but when i see the traffic on the links i see diffrences between them as following:
===========================
Interface IHQ IQD OHQ OQD RXBS RXPS TXBS TXPS TRTL
------------------------------------------------------------------------
* Serial2/0:0 0 0 0 367927 204000 328 145000 244 0
* Serial2/1:0 0 0 0 607751 39000 68 29000 58 0
* Serial3/0 0 0 0 475583 417000 731 346000 626 0
======================
seial3/0 if 2 PVCs each one is 2048Kbps
my concern is about serial2/0 and seial2/1 ,, as they are identical even in provider path to my remote end. and both of them are E1 conn.
can anyone explain to me why i see that diff. ?
Regards //
06-26-2007 09:22 PM
Hi
may be this link will help you.
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094820.shtml
Thanks
Mahmood
06-26-2007 11:11 PM
Hi Mahmoud,
This is normal as per destination load-sharing doesn't equally share the bandwidth, and thus its normal to have different bandwidth utilization on the links.
HTH,
Mohammed Mahmoud.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide