getting Data from one MARS to another one

Unanswered Question
Jun 27th, 2007
User Badges:

hi,


we have a MARS Box running which was not proper working. we initiated an advanced hardware replacement and after a few day's we've

got the replacement box. unfortunately the config and the log-data are only stored local on the "old" mars box. we didn't configure

archiving via NFS (which was a failure, i know ;-(


is there any possibility to get the (existing) stored data out of the old one and into the new one? the documentation doesn't describe

such a procedure (likely there is none), but maybe someone on you has an idea to this problem....


best regards

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
wong34539@yahoo.com Tue, 07/03/2007 - 10:07
User Badges:
  • Silver, 250 points or more

MARS Appliance functionality includes two procedures that you can perform using the MARS Appliance Recovery DVD-ROM. The approach you should take to recover your appliance depends upon whether or not you have archived data that you want to recover as well. Two decisions affect how you will recover your MARS Appliance:

http://www.cisco.com/en/US/products/ps6241/products_installation_and_configuration_guide_chapter09186a00804c4db4.html#wp1133696

mhellman Tue, 07/03/2007 - 12:33
User Badges:
  • Blue, 1500 points or more

Unless you can get the old box running long enough to get archiving going....you're SOL.

Actions

This Discussion