cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
906
Views
0
Helpful
3
Replies

Monitor dlsw+ status via SNMP and change config?

kt
Level 1
Level 1

I have two routers, a 2600 and a 2801, both with dlsw+ for mainframe access. One connected to my primary WAN connection and one on a backup. I need to be able to monitor the status of the dlsw connections to be able to redirect traffic in case of a failure.

I've seen that there is a MIB for dlsw, but it's less than clear which OID gives me status. (I suppose I can count cicuits, but that's plan B).

When status is determined - can I via a script on a server change the configurations of these routers to transfer the traffic from one to another? Via SNMP or otherwise?

Or am I barking up the wrong tree to solve this?

Kind regards

Kjetil Thorstensen

3 Replies 3

David Stanford
Cisco Employee
Cisco Employee

For config changes on routers have a look at:

http://www.cisco.com/en/US/customer/tech/tk648/tk362/technologies_tech_note09186a0080094aa6.shtml

For DLSW+ status have a look at the CISCO-DLSW-EXT-MIB and objects like:

cdeTrapTConnUpDown

cdeTrapCircuitUpDown

These are actually traps

Could you send me the document via e-mail? it requires a CCO login, which I do not have...

Kind regards

/Kjetil

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco