06-27-2007 12:07 PM - edited 03-14-2019 10:18 PM
hi,
I have installed the HWIC-4ES-POE in a CME 2821 ISR , but not getting power on my IP Phones. Any ideas why?
Solved! Go to Solution.
06-27-2007 01:44 PM
Do you have the POE PS for the 2821 ? That is optional. Do show environment to check.
Hope this helps, please rate post if it does!
06-27-2007 02:22 PM
You should get an AC-IP power supply
06-28-2007 12:54 AM
Would you consider rating useful posts for this or a next time ?
06-27-2007 01:44 PM
Do you have the POE PS for the 2821 ? That is optional. Do show environment to check.
Hope this helps, please rate post if it does!
06-27-2007 02:22 PM
You should get an AC-IP power supply
06-27-2007 03:26 PM
Can you please show me a link on how the AC-IP connects to the 2851 router. Any documentation will be helpfull.
06-27-2007 03:35 PM
The blessed manual:
As a recognition to those providing answers, please rate all useful posts using the scrollbox below!
06-27-2007 03:55 PM
Thanks all
06-28-2007 12:54 AM
Would you consider rating useful posts for this or a next time ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: