06-27-2007 05:30 PM - edited 03-17-2019 09:04 PM
I'm having difficulty getting the GW2P module to match the National ISDN signaling from the teleco. I had the teleco tech come on site and verify that NI-1 signal is coming from the teleco. The problem is Cisco does not say if the GW2P is using NI-1 or NI-2. Thoughts?
Thanks for any information you may have,
Darryl
07-03-2007 01:07 PM
It can be NI-1 or NI-2.
07-05-2007 04:48 AM
Thanks for the information. I read several other technical documents for voice gateways and PRI lines which spoke specifically about DMS-100, 5ESS, and NI-2, but never found anything on the subject for the GW2P.
Thanks again,
Darryl
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide