06-28-2007 02:16 AM - edited 03-13-2019 04:15 PM
I need to send some 4W E&M Type 5 interface circuits over a 3825/3845 router. What voice card can I use if any?
John
06-28-2007 02:21 AM
VIC-2E&M only.
Hope this helps, please rate post if it does!
06-28-2007 03:57 AM
Thanks for the info however it appears that card is no longer supported on the 3800. NM-HDV2 is the newer card and does support the 4w e&m function but my problem now is that on the card specifications there is no mention of type 1 ot type v interfaces !!
06-28-2007 04:49 AM
I stand corrected, the card is VIC2-2E/M, see following:
http://cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml
You can insert it directly in the WIC slot, you just need some PVDM2-xx on the motherboard.
Worry not with that you can do all the variations of E&M.
Hope this helps, please rate post if it does!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide