cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
369
Views
0
Helpful
1
Replies

Trouble with ATA Flash Cards

Hi Guys,

we encountered a funny issue when using ATA cards.

We want to upgrade our Hybrid SUP2-2GE to Native IOS, but no ATA Cards(64MB or 128MB) are readable or formatable.

Even a 24MB flash card was readable on one but not on another device.

When trying to format the ATA cards from CATOS (format disk0: or Slot0:, both won't work) it just says "unknown device".

Any Ideas how to format these disks and make them readable under CATOS?

thx in advance

1 Accepted Solution

Accepted Solutions

beth-martin
Level 5
Level 5

click the following URL as a trouble resolution guide for PCMCIA ATA Flash disks.

http://www.cisco.com/en/US/products/hw/routers/ps167/products_field_notice09186a008082da0a.shtml

View solution in original post

1 Reply 1

beth-martin
Level 5
Level 5

click the following URL as a trouble resolution guide for PCMCIA ATA Flash disks.

http://www.cisco.com/en/US/products/hw/routers/ps167/products_field_notice09186a008082da0a.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: