06-28-2007 05:22 AM - edited 03-14-2019 10:18 PM
Hi
I have some problems with connecting VG224 to CCM4.1
I create a new gateway on CCM (VG244-SCCP),create one Phone with directory number. Problem is that status of this phone "Not Found" IP address blunk,and I cant make call from CCM IPPnones to VG244Phones and back.H
Here is my config:
-----------------------------------------
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname VG224
!
boot-start-marker
boot-end-marker
!
enable secret xxx
enable password xxx
!
no aaa new-model
!
resource policy
!
ip subnet-zero
no ip dhcp use vrf connected
!
voice-card 0
!
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
!
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.1
encapsulation dot1Q 1 native
ip address 192.168.255.59 255.255.255.0
ip access-group 121 in
ip access-group 121 out
no snmp trap link-status
!
interface FastEthernet0/0.2
encapsulation dot1Q 700
ip address 10.10.0.4 255.255.0.0
no snmp trap link-status
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
!
interface FastEthernet0/1.1
encapsulation dot1Q 700
shutdown
no snmp trap link-status
!
ip classless
!
no ip http server
!
voice-port 2/0
!
voice-port 2/1
!
voice-port 2/2
!
voice-port 2/3
!
voice-port 2/4
!
voice-port 2/5
!
voice-port 2/6
!
voice-port 2/7
!
voice-port 2/8
!
voice-port 2/9
!
voice-port 2/10
!
voice-port 2/11
!
voice-port 2/12
!
voice-port 2/13
!
voice-port 2/14
!
voice-port 2/15
!
voice-port 2/16
!
voice-port 2/17
!
voice-port 2/18
!
voice-port 2/19
!
voice-port 2/20
!
voice-port 2/21
!
voice-port 2/22
!
voice-port 2/23
!
!
!
sccp local FastEthernet0/0.2
sccp ccm 10.10.0.50 identifier 1 version 4.1
sccp ip precedence 1
sccp codec g711ulaw mask
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
!
!
dial-peer voice 77 voip
destination-pattern 77...
voice-class codec 1
session target ipv4:10.10.0.50
!
dial-peer voice 72 voip
destination-pattern 72...
voice-class codec 1
session target ipv4:10.10.0.2
!
dial-peer voice 1 pots
destination-pattern 1000
port 2/2
!
!
line con 0
line aux 0
line vty 0 4
password xxx
login
!
end
VG224#
---------------------------------------
sh sccp all
SCCP Admin State: UP
Gateway IP Address: 10.10.0.4, Port Number: 2000
IP Precedence: 1
User Masked Codec list: g711ulaw
Call Manager: 10.10.0.50, Port Number: 2000
Priority: N/A, Version: 4.1, Identifier: 1
SCCP application services(dspfarm profiles) are not enabled
or haven't associated to SCCP CCM group
CCM Group Identifier: 1
Description: None
Binded Interface: NONE, IP Address: NONE
Associated CCM Id: 1, Priority in this CCM Group: 1
Registration Retries: 3, Registration Timeout: 10 sec
Keepalive Retries: 3, Keepalive Timeout: 30 sec
CCM Connect Retries: 3, CCM Connect Interval: 10 sec
Switchover Method: GRACEFUL, Switchback Method: GRACEFUL_GUARD
Switchback Interval: 10 sec, Switchback Timeout: 7200 sec
Signaling DSCP value: default, Audio DSCP value: default
Total number of active session(s) 0, and connection(s) 0
Total number of active session(s) 0, and connection(s) 0
Total number of active session(s) 0, connection(s) 0, and callegs 0
SCCP Application Service(s) Statistics Summary:
Total Conferencing Sessions: 0, Connections: 0
Total Transcoding Sessions: 0, Connections: 0
Total MTP Sessions: 0, Connections: 0
Total ALG-Phone Sessions: 0, Connections: 0
Total BRI-Phone Sessions: 0, Connections: 0
Total SCCP Sessions: 0, Connections: 0
VG224#
06-28-2007 05:52 AM
Try adding:
stcapp ccm-group 1
stcapp
that should trigger the registration.
06-28-2007 08:35 PM
I add this commands but nothing changes,and I cant add a few commands like "bind interface FastEthernet0/0.2" in the sccp ccm group 1.
06-29-2007 01:17 AM
Here is my new config,CCM see VG224 and analog phones,but I cant make any calls from VG to CCM and back. If look to debug it seems that call from CCM cames to VG,but phone dont ring.
77666 - CCM
77665 - VG
---------------------------------------------
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname VG224
!
boot-start-marker
boot-end-marker
!
logging buffered 8000 debugging
enable secret 5 $1$UF1Y$HZdGIlnQMiqMdEnNW06FF.
enable password 7 15141204062C20
!
no aaa new-model
!
resource policy
!
clock timezone MSK 3
clock summer-time MSK recurring last Sun Mar 3:00 last Sun Oct 2:00
ip subnet-zero
no ip dhcp use vrf connected
!
!
!
stcapp ccm-group 1
stcapp
!
voice-card 0
!
!
!
voice service voip
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.1
encapsulation dot1Q 1 native
ip address 192.168.255.59 255.255.255.0
ip access-group 121 in
ip access-group 121 out
no snmp trap link-status
!
interface FastEthernet0/0.2
encapsulation dot1Q 700
ip address 10.10.0.4 255.255.0.0
no snmp trap link-status
!
interface FastEthernet0/1
ip address 10.10.0.4 255.255.255.0
shutdown
duplex auto
speed auto
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.10.0.1
!
no ip http server
!
logging trap debugging
access-list 1 permit 192.168.255.0 0.0.0.255
access-list 1 deny any
access-list 121 permit ip 192.168.255.0 0.0.0.255 192.168.255.0 0.0.0.255
!
!
control-plane
!
!
voice-port 2/0
cptone RU
!
voice-port 2/1
cptone RU
!
voice-port 2/2
compand-type a-law
cptone RU
!
voice-port 2/3
!
voice-port 2/4
!
voice-port 2/5
!
voice-port 2/6
!
voice-port 2/7
!
voice-port 2/8
!
voice-port 2/9
!
voice-port 2/10
!
voice-port 2/11
!
voice-port 2/12
!
voice-port 2/13
!
voice-port 2/14
!
voice-port 2/15
!
voice-port 2/16
!
voice-port 2/17
!
voice-port 2/18
!
voice-port 2/19
!
voice-port 2/20
!
voice-port 2/21
!
voice-port 2/22
!
voice-port 2/23
!
!
!
sccp local FastEthernet0/0.2
sccp ccm 10.10.0.50 identifier 1 priority 1 version 4.1
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
switchback method graceful
!
!
dial-peer voice 72 voip
destination-pattern 72...
voice-class codec 1
session target ipv4:10.10.0.2
!
dial-peer voice 77665 pots
service stcapp
port 2/2
!
!
line con 0
line aux 0
line vty 0 4
password 7 050D1F07234A45
login
!
end
--------------------------------------------
Jun 29 07:30:44.213: CallInfoMsg Info:
calling party name: Jspc`mnb @.E.
called party name: Test_Analog_Port2
calling party: 77666
called party: 77665
line instance: 1
call reference: 16857831
call type: 1
orig called pty name: Test_Analog_Port2
orig called pty: 77665
last redirecting pty name: Test_Analog_Port2
last redirecting pty: 77665
orig cdpn redirect reason: 0
last redirect reason: 0
cgpn voice mailbox:
cdpn voice mailbox:
orig cdpn voice mailbox:
last redirectvoice mailbox:
call instance: 1
call security status: 0
pres restriction bits: 0
------------------------------------------
06-29-2007 03:49 AM
OK I chanded protocol from SCCP to MGCP, VG244 and CCM see each other, but I still cant make calls betцeen them, where can be a problem.
------------------------------------------------
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname VG224
!
boot-start-marker
boot-end-marker
!
logging buffered 8000 debugging
enable secret 5 $1$UF1Y$HZdGIlnQMiqMdEnNW06FF.
enable password 7 15141204062C20
!
no aaa new-model
!
resource policy
!
clock timezone MSK 3
clock summer-time MSK recurring last Sun Mar 3:00 last Sun Oct 2:00
ip subnet-zero
ip domain name xxx.org
no ip dhcp use vrf connected
!
!
voice-card 0
!
!
voice service voip
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
!
!
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.1
encapsulation dot1Q 1 native
ip address 192.168.255.59 255.255.255.0
ip access-group 121 in
ip access-group 121 out
no snmp trap link-status
!
interface FastEthernet0/0.2
encapsulation dot1Q 700
ip address 10.10.0.4 255.255.0.0
no snmp trap link-status
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.10.0.1
!
no ip http server
!
logging trap debugging
access-list 1 permit 192.168.255.0 0.0.0.255
access-list 1 deny any
access-list 121 permit ip 192.168.255.0 0.0.0.255 192.168.255.0 0.0.0.255
!
!
control-plane
!
!
voice-port 2/0
cptone RU
!
voice-port 2/1
cptone RU
!
voice-port 2/2
cptone RU
!
voice-port 2/3
!
voice-port 2/4
!
voice-port 2/5
!
voice-port 2/6
!
voice-port 2/7
!
voice-port 2/8
!
voice-port 2/9
!
voice-port 2/10
!
voice-port 2/11
!
voice-port 2/12
!
voice-port 2/13
!
voice-port 2/14
!
voice-port 2/15
!
voice-port 2/16
!
voice-port 2/17
!
voice-port 2/18
!
voice-port 2/19
!
voice-port 2/20
!
voice-port 2/21
!
voice-port 2/22
!
voice-port 2/23
!
ccm-manager mgcp
no ccm-manager fax protocol cisco
!
mgcp
mgcp call-agent 10.10.0.50 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp bind control source-interface FastEthernet0/0.2
mgcp bind media source-interface FastEthernet0/0.2
!
mgcp profile default
!
!
!
dial-peer voice 72 voip
destination-pattern 72...
voice-class codec 1
session target ipv4:10.10.0.2
!
dial-peer voice 77 voip
destination-pattern 77...
voice-class codec 1
session target ipv4:10.10.0.50
!
dial-peer voice 77665 pots
description 77665
service mgcpapp
port 2/2
!
!
line con 0
line aux 0
line vty 0 4
password 7 050D1F07234A45
login
!
VG224#
-----------------------------------------------
VG224#sh ccm-manager
MGCP Domain Name: VG224.xxx.org
Priority Status Host
============================================================
Primary Registered 10.10.0.50
First Backup None
Second Backup None
Current active Call Manager: 10.10.0.50
Backhaul/Redundant link port: 2428
Failover Interval: 30 seconds
Keepalive Interval: 15 seconds
Last keepalive sent: 15:47:11 MSK Jun 29 2007 (elapsed time: 00:00:13)
Last MGCP traffic time: 15:47:11 MSK Jun 29 2007 (elapsed time: 00:00:13)
Last failover time: None
Last switchback time: None
Switchback mode: Graceful
MGCP Fallback mode: Not Selected
Last MGCP Fallback start time: None
Last MGCP Fallback end time: None
MGCP Download Tones: Disabled
Configuration Error History:
FAX mode: disable
VG224#
-----------------------------------------------
----------------------------------------------
06-29-2007 04:49 AM
MGCP has it's own tricks to look out for. For example, the device name in CCM has to match exactly the hostname+domain name of the router/gateway.
Stick with one protocol and get through that first is my opinion.
I see that you have ACLs on your interfaces. The first thing I would do is remove any ACLs to ensure you can get this working. Minimally, have logging enabled on your ACLs so you can see which ones are being hit.
09-21-2007 01:11 PM
I had to enter the sti to the dial peer from the config documents:
As soon as I added the service to the dial peer, the port registered and I can place calls.
stcapp ccm-group 1
stcapp
!
dial-peer voice 102 pots
service stcapp
port 2/2
11-16-2007 09:59 AM
try adding the following cmds:
stcapp ccm-group 1
stcapp
and a dial peer for each port you will use as follows:
dial-peer voice 501 pots
service stcapp
port 2/0
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: