Pix 506e - Upgrading PDM - syntax?

Answered Question

I'm trying to upgrade my PDM from V3.0(2) to V3.0(3), this is supposed to resolve some issues of connecting to the PDM with newer versions of Java.

Below is the syntax I'm typing in during a hyperterminal session. Obviously it isn't working. Can someone give me the correct syntax?


Copy tftp //tftp-root/pdm-304.bin flash pdm

Correct Answer by vitripat about 10 years 1 day ago

Try using following command syntax-


PIX# copy tftp flash:pdm

Address or name of remote host []? x.x.x.x

Source file name [mybackup]? pdm-303.bin

copying tftp://x.x.x.x/pdm-303.bin to flash:pdm

[yes|no|again]? yes


Assuming that x.x.x.x is the IP address of your TFTP server and pdm-303.bin is the image name.


Hope this helps.


Regards,

Vibhor.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
vitripat Thu, 06/28/2007 - 07:26
User Badges:
  • Gold, 750 points or more

Try using following command syntax-


PIX# copy tftp flash:pdm

Address or name of remote host []? x.x.x.x

Source file name [mybackup]? pdm-303.bin

copying tftp://x.x.x.x/pdm-303.bin to flash:pdm

[yes|no|again]? yes


Assuming that x.x.x.x is the IP address of your TFTP server and pdm-303.bin is the image name.


Hope this helps.


Regards,

Vibhor.


Actions

This Discussion