Solved: Pix 506e - Upgrading PDM - syntax? - Cisco Community

407

Views

5

Helpful

1

Replies

I'm trying to upgrade my PDM from V3.0(2) to V3.0(3), this is supposed to resolve some issues of connecting to the PDM with newer versions of Java.

Below is the syntax I'm typing in during a hyperterminal session. Obviously it isn't working. Can someone give me the correct syntax?

Copy tftp //tftp-root/pdm-304.bin flash pdm

1 Accepted Solution

Accepted Solutions

Try using following command syntax-

PIX# copy tftp flash:pdm

Address or name of remote host []? x.x.x.x

Source file name [mybackup]? pdm-303.bin

copying tftp://x.x.x.x/pdm-303.bin to flash:pdm

[yes|no|again]? yes

Assuming that x.x.x.x is the IP address of your TFTP server and pdm-303.bin is the image name.

Hope this helps.

Regards,

Vibhor.

View solution in original post

1 Reply 1

Try using following command syntax-

PIX# copy tftp flash:pdm

Address or name of remote host []? x.x.x.x

Source file name [mybackup]? pdm-303.bin

copying tftp://x.x.x.x/pdm-303.bin to flash:pdm

[yes|no|again]? yes

Assuming that x.x.x.x is the IP address of your TFTP server and pdm-303.bin is the image name.

Hope this helps.

Regards,

Vibhor.

Learn, share, save

Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.

New here? Get started with these tips. How to use Community New member guide

Log in to Community

Review Cisco Networking products for a $25 gift card