Solved: C2801 as IPIPGW

fsanchez · ‎06-28-2007

Hi, can someone tell me what is the max amount of simultaneous voice call that c2801 support as H323 to H323 IPIPGW?

P.D: The media is to flow through the gateway.

Thanks,

paolo bevilacqua · ‎06-28-2007

If you consider the IP switching capacity of the 2801, and add a 20% "just because it's RTP", you are probably supporting like 5,000 pps, or 100 calls. But unless you have an influence to cisco, they won't tell you the tested numbers, if they have.

Hope tis helps, please rate post if it does!

View solution in original post

paolo bevilacqua · ‎06-28-2007

If you consider the IP switching capacity of the 2801, and add a 20% "just because it's RTP", you are probably supporting like 5,000 pps, or 100 calls. But unless you have an influence to cisco, they won't tell you the tested numbers, if they have.

Hope tis helps, please rate post if it does!

fsanchez · ‎07-04-2007

Hi, thanks for the answer,

Can you tell me how you get this number of 100 calls based on 5,000 pps?

paolo bevilacqua · ‎07-04-2007

Hola,

50 pps x 100 = 5,000.

This assuming the common 20ms frame size and VAD (only side talking at time).

With no VAD, multiply by 2, now 10,000 is probably a bit high for a 2801, but I think it still could do that.

fsanchez · ‎07-04-2007

Great...

Muchas Gracias