Weird Problem: CCM Express (2600)

Unanswered Question
Jun 29th, 2007
User Badges:

First off Hi,

I am not sure if I am posting this in the right spot, but I have a weird problem and I am not sure what the problem can be. I will try to make this short. I have a Callmanager Express 3.3.3 on a 2600 and we have a problem with just 2 phones (that have a shared line)out of 10. The shared line rings non stop, and only stops ringing when we dial that shared line. Then after a random amount of time the shared line starts ringing again.


Everything was working fine on an old IOS, but we needed a new TSP so we had to upgrade to the new IOS which the latest was:12.3(14)T7

After the problem started we swapped it out with a 2821 and everything was fine. However, the 2821 is just a loaner so I need to put the 2600 back in service.

Does anyone have a thought on what the problem might be? I will apreciate any ideas.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Keith Fulcher Mon, 08/13/2007 - 06:50
User Badges:

Just to let everyone know..... it turned out that the phoneload fw was bad. I downgraded and it was fixed.


This Discussion