smalkeric Fri, 07/06/2007 - 06:05
User Badges:
  • Silver, 250 points or more

Depending on the network infrastructure, receiving hosts may also benefit from having intelligent NIC cards that can filter out multicasts to unwanted groups. For more information please click following URL: http://www.freepatentsonline.com/6614787.html


Jon Marshall Fri, 07/06/2007 - 09:31
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


Yes there is (depending on the multicast group addresses) but could you be a bit more specific about what you are trying to do ie.


what multicast groups are you trying to block

Do you need to block from all vlans, some vlans etc.


Jon

mkarthick Fri, 07/06/2007 - 21:38
User Badges:

Hi Jon


Thanks for ur reply.....


I have created 6 VLAN's (10,20,30,40,50,60). Each application has it's own mulicast groups .I have Multicast group address which belongs to VLANs

233.1.2.3 Vlan 10

236.0.0.5 Vlan 20

236.0.0.10 Vlan 20

233.1.2.12 Vlan 20

224.0.1.40 Vlan 30

233.1.2.3 Vlan 30

239.255.255.255 Vlan 40

239.255.255.250 Vlan 40


Now my question is I don't want 239.255.255.255&239.255.255.0 which belongs to VLAN 40 to any other vlan's .. Is it possible?


Regards

Karthick


Actions

This Discussion