LMS 2.6: username minimum length

Answered Question
Jun 29th, 2007

It's not letting me create a local user with a name fewer than 5 chars.


Validation Error

Invalid username: It should be atleast 5 characters.


Is there any way around that? The ones inherited from LMS 2.2 are fine.


Can I manually stick it in cwpass?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
yjdabear Fri, 06/29/2007 - 14:07

Nice to know that method. In a pinch, I manually added a user to cwpass, which turned out alright for my purpose too, without having to restart any process.

yjdabear Mon, 07/02/2007 - 07:10

Does the resetLoginModule.pl script erase the ACS server credentials currently stored?


Is there any way to adjust the timeout value of how long LMS waits for ACS?


I just noticed that when I toggled from TACACS+ (with debug OFF) to CiscoWorks Local, the latter setting got saved with debug ON by default. This was in the non-ACS mode.


Does each instance of SCP to/from a Cisco router/switch take up a VTY line? I'm seeing our MOTD in the list of Partially Successful Config Archive devices:


partial

rtr1 PRIMARY STARTUP Jul 02 2007 02:14:53 SSH: Failed to establish SSH connection to xxx.xxx.xxx.xxx - Cause: Connection refused. TELNET: Failed to establish TELNET connection to xxx.xxx.xxx.xxx - Cause: Connection refused. PRIMARY-STARTUP config Fetch Operation failed for TFTP. Failed to fetch config using SCP.(truncated MOTD banner)

Joe Clarke Mon, 07/02/2007 - 08:29

The resetLoginModule.pl script only disables the login module, it does not affect its configuration. The timeout for TACACS+ is hardcoded. Each SCP session does take up a VTY line.

Actions

This Discussion