thisisshanky Sat, 06/30/2007 - 13:50
User Badges:
  • Purple, 4500 points or more

Yes, to configure zone prefixes, shutdown the gatekeeper and then configure zone prefixes and then do a no shut.



PS: please remember to rate posts!

Justin Pascal Tue, 07/03/2007 - 06:19
User Badges:

Hi Sankar,

Thanks for your response.

In my scenario i have 5 locations.

1 CCM and 1 CME, CCM controls 4 locations.

I have a GK but my question now is that what will happen when 1 zone goes to SRST, and CME calls that zone.

Current GK config zone prefixes.






The first 1-4 zone prefixes are controlled by CCM ICT, can i have my SRST GWs registered to the GK and during SRST events add a zone prefix to a different zone (SRST Zones )? I need that when a CME calls, if WAN is still available from CME to GK and SRST GW,but CCMs down... the call gets routed via GK.

For example


zone local HQ

zone local BR1

zone local BR2

zone local BR3

zone local CME

zone prefix HQ 1...

zone prefix HQ 2...

zone prefix HQ 3...

zone prefix HQ 4...


im getting an error when i configure the same prefix for a different zone.



This Discussion