cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
279
Views
0
Helpful
1
Replies

What does this mean?Supports only l3-ipmulticast addresses - Catalyst 3750

astanislaus
Level 2
Level 2

What does this message mean?

=============================

Switch(config)#mac-address-table static 0100.5e7a.2a01 vlan 301 interface fa 1/0/2

Supports only l3-ipmulticast addresses.

HQIRDMZ2(config)#exit

=========================================

Show Version:#sh version

Cisco Internetwork Operating System Software

IOS (tm) C3750 Software (C3750-I5-M), Version , RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2004 by cisco Systems, Inc.

Compiled Mon 05-Apr-04 22:06 by antonino

Image text-base: 0x00003000, data-base: 0x009206D8

ROM: Bootstrap program is C3750 boot loader

BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(11r)AX, RELEASE SOFTWARE (fc1)

HQIRDMZ2 uptime is 19 weeks, 5 days, 12 hours, 7 minutes

System returned to ROM by power-on

System restarted at 01:00:47 AEDT Sun Feb 11 2007

System image file is "flash:c3750-i5-mz.121-19.EA1d/c3750-i5-mz.121-19.EA1d.bin"

cisco WS-C3750G-24T (PowerPC405) processor (revision A0) with 118776K/12288K bytes of memory.

Processor board ID CAT0730X011

Last reset from power-on

Bridging software.

1 Virtual Ethernet/IEEE 802.3 interface(s)

24 Gigabit Ethernet/IEEE 802.3 interface(s)

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00:0D:65:88:89:00

Motherboard assembly number : 73-8046-05

Power supply part number : 341-0048-01

Motherboard serial number : CAT072903E0

Power supply serial number : LIT071800N7

Model revision number : A0

Motherboard revision number : A0

Model number : WS-C3750G-24T-E

System serial number :

Hardware Board Revision Number : 0x05

Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 24 WS-C3750G-24T 12.1(19)EA1d C3750-I5-M

Configuration register is 0xF

1 Reply 1

astanislaus
Level 2
Level 2

Please point me to any links / urls that clearly explains why this is happening. I tried this command in my lab switch which is just a 3750 and not a 3750G and this command is accepted.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card