07-02-2007 08:01 AM - edited 03-05-2019 05:04 PM
07-02-2007 08:59 AM
Hi Lisa
From the 3560E Q&A (for 3560G read 3560)
=============================================
Q. What are the notable differences/features between the Cisco Catalyst 3560-E and the Cisco Catalyst 3560?
A. The differences are as follows:
? Cisco Catalyst 3560-E provides a true line-rate (nonblocking) Gigabit Ethernet to the desktop solution with two line-rate 10 Gigabit Ethernet uplinks.
? The Cisco Catalyst 3560-E has a backplane switching ASIC, which also makes forwarding decisions, to help the switch perform wire-rate local switching.
? The Cisco Catalyst 3560-E supports dynamic a pluggable module that converts a 10 Gigabit Ethernet slot into a slot that can fit 2 Gigabit Ethernet ports. This allows for easy migration for customers moving from Gigabit Ethernet uplinks to 10 Gigabit Ethernet uplinks.
? The Cisco Catalyst 3560-E supports hot-swappable power supplies.
? The Cisco Catalyst 3560-E supports jumbo frame routing and increases the frame size to 9216 bytes.
? The Cisco Catalyst 3560-E supports uncompressed IPv6 address tables. This allows the software to program the full IPv6 address in the hardware. In addition, equal cost routing for IPv6 uses the uncompressed IPv6 address.
? The Cisco Catalyst 3560-E supports destination stripping of unicast packets.
=============================================
HTH
Jon
07-02-2007 08:57 AM
3560E supports 10Gb modules.
07-02-2007 08:59 AM
Hi Lisa
From the 3560E Q&A (for 3560G read 3560)
=============================================
Q. What are the notable differences/features between the Cisco Catalyst 3560-E and the Cisco Catalyst 3560?
A. The differences are as follows:
? Cisco Catalyst 3560-E provides a true line-rate (nonblocking) Gigabit Ethernet to the desktop solution with two line-rate 10 Gigabit Ethernet uplinks.
? The Cisco Catalyst 3560-E has a backplane switching ASIC, which also makes forwarding decisions, to help the switch perform wire-rate local switching.
? The Cisco Catalyst 3560-E supports dynamic a pluggable module that converts a 10 Gigabit Ethernet slot into a slot that can fit 2 Gigabit Ethernet ports. This allows for easy migration for customers moving from Gigabit Ethernet uplinks to 10 Gigabit Ethernet uplinks.
? The Cisco Catalyst 3560-E supports hot-swappable power supplies.
? The Cisco Catalyst 3560-E supports jumbo frame routing and increases the frame size to 9216 bytes.
? The Cisco Catalyst 3560-E supports uncompressed IPv6 address tables. This allows the software to program the full IPv6 address in the hardware. In addition, equal cost routing for IPv6 uses the uncompressed IPv6 address.
? The Cisco Catalyst 3560-E supports destination stripping of unicast packets.
=============================================
HTH
Jon
07-02-2007 09:39 AM
Thanks, Jon.
07-02-2007 10:39 AM
One more difference is that the 3560-48 port switch can support only 360W of POE power which means it can give power to all the 48 ports only if the PoE device is class 2 i.e which takes only 7.5W
On the other hand the 3560E supports 802.af power on all the 48 ports simulataneously (15.4 watts/port)
This is true for even the 3750 series
HTH, rate if it does
Narayan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: