ASA 5510 class-map command missing

Unanswered Question

I have an ASA-5510 with the SSM-CSC module installed. I am trying to build a policy-map to identify traffic to divert to the CSC module for scanning, but the class-map command isn't supported. I can build the ACL and the policy-map but the class-map command keeps erroring out. The ASA is running 7.1(2) software with an ASDM verison of 5.1(2). The CSC module is installed, active , and licensed. Do I need to upgrade software? Any help would be appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion