Hi Sir,
I have the following QoS config:
!
class-map match-all MyClass
match protocol http
!
policy-map MyPolicy
class MyClass
set fr-de
!
map-class frame-relay FRClass
service-policy output MyPolicy
!
interface Serial0/0/0
no ip address
encapsulation frame-relay
no frame-relay inverse-arp
!
interface Serial0/0/0.256 multipoint
ip address 1.1.1.2 255.255.255.224
frame-relay map ip 1.1.1.5 105 broadcast
frame-relay interface-dlci 105
class FRClass
!
Do I need to configure the command "frame-relay traffic-shaping" on interface S0/0/0?
Thank you.
B.Rgds,
Lim TS