EAPOL-key M2 with invalid MIC (WLC 4.1.171.0)

Unanswered Question
Jul 3rd, 2007
User Badges:

I have a lot of client in one configuration who have problem with the message:

EAPOL-key M2 with invalid MIC


Config:

4402-12 in 4.1.171.0 (and ER) sw release

AP1242 with 2 4941 in diversity mode


SSID in WPA-TKIP PSK and DHCP on the WLC.


A lot of client can't connect to the switch. With Intel card, i have try the lasted drivers, and it's ok, but with some device like Intermec on windows mobile, it's not working. You can look the trace in the file log.


Some idea ?



Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ebreniz Mon, 07/09/2007 - 10:14
User Badges:
  • Silver, 250 points or more

Upgrade the controllerto the latest version

sbenoliel Tue, 07/10/2007 - 00:36
User Badges:

It's already in the latest version: 4.1.171.0 and 4.1.171.0 ER

jcornford Thu, 07/19/2007 - 06:02
User Badges:

I just had a few problems with the same error. It turned out that this was an issue with the client device NEEDING the key to be entered in HEX (even though it would take an ASCII if you typed it). I converted the ASCII PSK I'd configured on the controller into HEX and entered it on the client, and it works fine. You might want to try that if you haven't already.

alberthilt Tue, 08/07/2007 - 03:22
User Badges:

hi there,


if MFP is enabled globally, and in the SSID too, set Client protection to "allowed". seems like MFP it?s set to "required"

Actions

This Discussion

 

 

Trending Topics - Security & Network