Problem active to balance between two equipment

Unanswered Question
Jul 3rd, 2007

Model: CISCO WS-C6509 Description of the problem: We have trunk qualified between the equipment cpdv_01 and cpdv_02. Trunk has a connection main in the FastEthernet8/19 interface and secondary in the FastEthernet9/38. The problem is that they are balancing the traffic, and leaves a similar amount in both interfaces. We opened this consultation to them so that they confirm to us if this is normal and that to make to avoid it.

cpdv_01#sho run int gi8/19

Building configuration...

Current configuration : 297 bytes


interface GigabitEthernet8/19

description trunk2a_telefonicasa02

no ip address

speed 1000

duplex full

no snmp trap link-status


switchport trunk allowed vlan


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Amit Singh Tue, 07/03/2007 - 23:48

Please explain your problem in details.. its very hard to understand the problem that you are facing with the above explanation..

-amit singh


This Discussion