Ethernet card

Answered Question
Jul 4th, 2007

Hi all,

I need an ethernet card with 2 ports

we have the card with 1 port WIC-1ENET=

If there is a card with 2 port let me have the part number

Note: I do not need a switchport. I neet ethernet port.

Thanks

Eric

Correct Answer by royalblues about 9 years 7 months ago

If i understand you need a routed ethernt port.

For 2811 you can use the 1-port HWIC-1FE

2 port is not supported on the 2811

http://www.cisco.com/en/US/products/hw/modules/ps2641/products_module_installation_guide_chapter09186a008068dde6.html#wp1049748

For 2611 check this link

http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091b89.html

HTH, rate if it does

Narayan

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
royalblues Wed, 07/04/2007 - 03:12

If i understand you need a routed ethernt port.

For 2811 you can use the 1-port HWIC-1FE

2 port is not supported on the 2811

http://www.cisco.com/en/US/products/hw/modules/ps2641/products_module_installation_guide_chapter09186a008068dde6.html#wp1049748

For 2611 check this link

http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091b89.html

HTH, rate if it does

Narayan

Actions

This Discussion