07-04-2007 02:29 AM - edited 03-05-2019 05:07 PM
Hi all,
I need an ethernet card with 2 ports
we have the card with 1 port WIC-1ENET=
If there is a card with 2 port let me have the part number
Note: I do not need a switchport. I neet ethernet port.
Thanks
Eric
Solved! Go to Solution.
07-04-2007 03:12 AM
If i understand you need a routed ethernt port.
For 2811 you can use the 1-port HWIC-1FE
2 port is not supported on the 2811
http://www.cisco.com/en/US/products/hw/modules/ps2641/products_module_installation_guide_chapter09186a008068dde6.html#wp1049748
For 2611 check this link
http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091b89.html
HTH, rate if it does
Narayan
View solution in original post
07-04-2007 02:31 AM
which platform are you looking this for?
07-04-2007 02:32 AM
i need it for 2611 or 2811 series router
Thaks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
