07-04-2007 05:05 AM - edited 03-11-2019 03:39 AM
Hello everyone !
I have 2 Pix 515 here in production, each one for an internet line.
For six month , i have serious trouble with the one connected to the bussyiest one : every 1-2 weeks it reloads itself most often at the worst moment, where hundreds of client are connected ;(
Sure it reloads fast but every connection is lost and clients are to reconect...
I have an Backup unit with the same caracteristics so i put it online ...
3 weeks after ... reload in the middle of the morning ,(
Failover is not really a solution as i don't have an free ethernet for state failover (using all 4 zones).
Tried to implement syslog but it seems to be verrrryyyy slow as my syslog server where receiving msg from the pix that were 2-3 hours late ???
Couls that be an firware issue ? I use 7.0(1) and idon't have anymore CCO access so i can upgrade to 7.22 ;(
Any idea ?
Here's the spec of one :
-----------------
FWGLI-EASYNET# show memory
Free memory: 95268744 bytes (71%)
Used memory: 38948984 bytes (29%)
------------- ----------------
Total memory: 134217728 bytes (100%)
FWGLI-EASYNET# show version
Cisco PIX Security Appliance Software Version 7.0(1)
Device Manager Version 5.0(1)
Compiled on Thu 31-Mar-05 14:37 by builders
System image file is "flash:/pix701.bin"
Config file at boot was "startup-config"
FWGLI-EASYNET up 1 hour 59 mins
Hardware: PIX-515, 128 MB RAM, CPU Pentium 200 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB
0: Ext: Ethernet0 : media index 0: irq 11
1: Ext: Ethernet1 : media index 1: irq 10
2: Ext: Ethernet2 : media index 2: irq 9
3: Ext: Ethernet3 : media index 3: irq 7
Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has an Unrestricted (UR) license.
-----------------
I have no clue... Everything is fine when it reboots from the asdm view ... Memory ok, cpu ok (barely never go further than 10%)
Should i put a fan on the cpu ??
07-04-2007 05:47 AM
08-03-2007 01:51 AM
I have a very similar issue. Did you resolve this?
regards,
M
08-03-2007 03:50 AM
version 7.01 is reported to have many bugs casuing crashes based on various conditions.. plan a code upgrade , version 7.2 is a more statble code.
Refere to this furum link for similarities
Bug report based on version code.
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
10-07-2009 11:10 AM
I do have the same issue.It turned out to be a bug in the IOS. The bug is CSCsx64741.
However, 7.01 is not listed withe the version affected
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: