07-04-2007 05:51 AM - edited 03-11-2019 03:40 AM
i am using FWSM in single mode.But the main issue is my vlan interfaces showing down.
Please let me know how to up the vlan interfaces.
shivlu
07-04-2007 06:26 AM
Hi Shivlu
Can you post the configs for your FWSM and your 6500 switch please.
Jon
07-04-2007 06:58 AM
Hi Jon
I am telling you about my scenerio.We are having 6513 with 2*FWSM module.We are running 4 vlans in switch(1(for infrastructure running ospf),15 for monitoring,5 for internal server and 11 for AVVID).We donot want natting in the firewall.But we want our traffic will flow thru the firewall for only vlan 5,15 and 11.
07-04-2007 08:20 AM
Your firewall vlan interfaces do not match the vlan interfaces you have configured on the switch. Change your interfaces to correct numbers. Below is a link that may help.
http://www.cisco.com/en/US/docs/security/fwsm/fwsm11/configuration/guide/bascfg.html#wp1061172
FWSM:
interface Vlan10
nameif inside
interface Vlan20
nameif outside
6500 Switch:
interface Vlan1
description ####### INFRASTRUCTURE LAN ######
ip address 10.0.0.2 255.255.255.192
no ip redirects
!
interface Vlan5
description #### SNMC SERVER RANGE ####
ip address 10.0.1.1 255.255.255.128
!
interface Vlan7
description #### SNMC IP-PHONE RANGE ####
!
interface Vlan11
description #### SNMC VIDEO_AC_UPS_CAMERA RANGE ####
!
interface Vlan15
description ##### MONITORING LAN ####
07-04-2007 08:12 PM
hi jon
thanks a lot,dear. Today i am going to configure the FWSM.If i face any problem thn i will let you know.
shivlu
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: