Admin access right in 3005 VPN Concentrator

Unanswered Question
Jul 4th, 2007
User Badges:

Hi All,

I have a VPN concentrator 3005 but unknowingly I created a user and gave it admin right. Now i do not have admin access on both the user and the old admin account. I have read about password recovery but I am confused on the solution note that says if I am running a code 2.5 or earlier, i should contact TAC. Question " is my concentrator running 2.5 or 4.7 based on the information below.

Bootcode Rev: Cisco Systems, Inc./VPN 3000 Concentrator Series Version 2.5.Rel Jun 21 2000 18:57:52

Software Rev: Cisco Systems, Inc./VPN 3000 Concentrator Version 4.7.Rel Mar 10 2005 14:58:16

Regards

pc

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rochopra Wed, 07/04/2007 - 15:49
User Badges:
  • Cisco Employee,

Hi


The line in password recovery document refers to Bootcode version.



Regards

Rohit


peteruwa Thu, 07/05/2007 - 00:08
User Badges:

Thanks Rohit. Does that mean I have to contact TAC for assistance or will the password recovery procedure still work for me even though the bootcode is release 2.5? I will need a password recovery procedure for releasae 2.5

Regards

Pc

rochopra Thu, 07/05/2007 - 05:03
User Badges:
  • Cisco Employee,

I will recomend you to ocntact TAC as you are using fairly old version of bootcode


Regards

Rohit

peteruwa Mon, 07/09/2007 - 07:59
User Badges:

Pls does anyone know the procedure for password recovery of VPN concentrator with release 2.5 or below. I have contacted TAc but not getting the adequate help at the moment.

Regards

PC

Actions

This Discussion