07-04-2007 07:16 AM
Hi All,
I have a VPN concentrator 3005 but unknowingly I created a user and gave it admin right. Now i do not have admin access on both the user and the old admin account. I have read about password recovery but I am confused on the solution note that says if I am running a code 2.5 or earlier, i should contact TAC. Question " is my concentrator running 2.5 or 4.7 based on the information below.
Bootcode Rev: Cisco Systems, Inc./VPN 3000 Concentrator Series Version 2.5.Rel Jun 21 2000 18:57:52
Software Rev: Cisco Systems, Inc./VPN 3000 Concentrator Version 4.7.Rel Mar 10 2005 14:58:16
Regards
pc
07-04-2007 03:49 PM
Hi
The line in password recovery document refers to Bootcode version.
Regards
Rohit
07-05-2007 12:08 AM
Thanks Rohit. Does that mean I have to contact TAC for assistance or will the password recovery procedure still work for me even though the bootcode is release 2.5? I will need a password recovery procedure for releasae 2.5
Regards
Pc
07-05-2007 05:03 AM
I will recomend you to ocntact TAC as you are using fairly old version of bootcode
Regards
Rohit
07-05-2007 05:18 AM
Thanks Rohit. will do and let you know
07-09-2007 07:59 AM
Pls does anyone know the procedure for password recovery of VPN concentrator with release 2.5 or below. I have contacted TAc but not getting the adequate help at the moment.
Regards
PC
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide