Site-2-site VPN

Unanswered Question
Edison Ortiz Wed, 07/04/2007 - 11:45

Do this on both routers.

! define hash and authentication for IKE

crypto isakmp policy 1

hash md5

authentication pre-share

crypto isakmp keepalive 30 5

! define ipsec hash and encryption

crypto ipsec transform-set myset esp-3des esp-md5-hmac

! define neighbor ipsec device, apply ipsec and interesting traffic

crypto map mymap 1 ipsec-isakmp

set peer [neighbor ip]

set transform-set myset

match address 100

! define ACL

access-list 100 permit ip [source network] [destination network ]

! apply ipsec to the egress interface.

interface s0/0

ip address x.x.x.x x.x.x.x

crypto map mymap

guruprasadr Wed, 07/04/2007 - 20:25

HI alsayed, [Pls Rate if Helps]

Please see the Attachment in my Post.

Complete Configuration of VPN between 2 Routers.

As you asked for, the Attached Document Explains with a Sample Picture Setup & complete Configuration for the same.


Best Regards,

Guru Prasad R


This Discussion