Digital Link With CME

Unanswered Question
Jul 4th, 2007

Hello, I have one digital link configured on a Controller e1,

My carrier askme to change ANI digits, to forward calls to PSTN

Heres my Conf.

controller E1 1/0

framing NO-CRC4

ds0-group 1 timeslots 1-15,17-31 type r2-digital r2-co ani

cas-custom 1

country telmex

category 2

answer-signal group-b 1



voice-port 1/0:1


dial-peer voice 10 pots

destination-pattern T


port 1/0:1

forward-digits all

How can i change Ani digits to pass it to my Carrier ISP on Cisco Callmanager eXPRESS


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
robert.bernal Wed, 07/04/2007 - 16:30

By the way

default Ani number is the CCME Extension i see it on debug, when i recive digits on debug

I need to change Ani to 40005000


Paolo Bevilacqua Wed, 07/04/2007 - 16:34


not difficult. On the DP used for outgoing calls, configure "clid network-number ".

Hope this helps, please rate post if it does!


This Discussion