07-05-2007 02:10 AM - edited 03-14-2019 10:24 PM
Hi,
I have Cisco CCME network installed with Cisco IP Phone 7940, 7936 and 7912. It is working fine. Recently, I bought a Cisco IP Phone 7911 due to 7912 obsolete and having problem using 7911 phone on my VOIP network.
I have tried to upload 7911 firmware to CCME router but still not working. I am not able to find 7911 from command telephony-service
load 7911 SCCP11.8-3-1S
So, I used 7910 for this.
Pls advise!
Thanks!
BR,
Khor
07-05-2007 02:53 AM
Hi,
please leave alone the GUI that is not good for this job.
Now, have you configured "tftp-server
After that, check "term mon" and "debug tftp event" to check the upgrade process.
Hope this helps, please rate post if it does!
07-05-2007 06:46 AM
What version of CME are you running?
Support for the 7911 was not added until CME4.x I believe.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide