Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
466
Views
2
Helpful
6
Replies

SIP Register problem

anthonyfear
Level 1
Level 1

‎07-05-2007 07:35 AM - edited ‎03-14-2019 10:25 PM

Hi All

receiving this when trying to register sip:

Jul 5 15:31:33.031: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Sent:

REGISTER sip:217.10.79.23:5060 SIP/2.0

Via: SIP/2.0/UDP 192.168.4.253:5060;branch=z9hG4bK5211AC

From: <sip:7828151@217.10.79.23>;tag=19DA70-2DC

To: <sip:7828151@217.10.79.23>

Date: Thu, 05 Jul 2007 15:31:33 GMT

Call-ID: 232B9E6D-2A3F11DC-8012D821-FEE92517

User-Agent: Cisco-SIPGateway/IOS-12.x

Max-Forwards: 70

Timestamp: 1183649493

CSeq: 11 REGISTER

Contact: <sip:7828151@192.168.4.253:5060>

Expires: 3600

Content-Length: 0

Jul 5 15:31:33.099: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Received:

SIP/2.0 403 Forbidden (client configuration error)

Via: SIP/2.0/UDP 192.168.4.253:5060;rport=50062;branch=z9hG4bK5211AC

From: <sip:7828151@217.10.79.23>;tag=19DA70-2DC

To: <sip:7828151@217.10.79.23>;tag=8367f0f887e3954243ec30fa0f5db288.4967

Call-ID: 232B9E6D-2A3F11DC-8012D821-FEE92517

CSeq: 11 REGISTER

Content-Length: 0

Any ideas?

I'm runing 12.4(15)T with cme 4.0.1

Labels:
0 Helpful
6 Replies 6

paolo bevilacqua
Hall of Fame
Hall of Fame

‎07-05-2007 08:02 AM

Hi,

What device are you using for NAT? If it is not translating the embeeded address correctly, the the remote SIP-UA may be seeing you private IP address and get upset about it.

0 Helpful

anthonyfear
Level 1
Level 1
In response to paolo bevilacqua

‎07-05-2007 08:05 AM

I'm using the same 837 router with NAT that I always have.

It's worked previously and there hasn't been any change on the 837.

Any ideas?

0 Helpful

paolo bevilacqua
Hall of Fame
Hall of Fame
In response to anthonyfear

‎07-05-2007 08:11 AM

Did it happened after upgrade to 12.4(15)T ?

If so, would you be able to go back and compare traces ?

anthonyfear
Level 1
Level 1
In response to paolo bevilacqua

‎07-05-2007 10:36 AM

Looks like it was coincidence that I happen to upgrade today and the sip registration stops working!!!

I went back to 12.4(11) - no registration

then went back to 12.4(9) - still no registration.

So I tried different provider - registered!

Upgraded to 12.4(11) - registered!

Upgraded to 12.4(15) - still registers!

Must be down to my sip provider! Arrgghhhhhh!

Thanks anyway

0 Helpful

anthonyfear
Level 1
Level 1
In response to paolo bevilacqua

‎07-06-2007 06:46 AM

Hi There

Got a reply from the sip provider today telling me they have changed their expires timeout from 3600 to 600.

I've changed sip-ua registrar statement to :

registrar ipv4:x.x.x.x expires 600

but it's still not working - do i need to change anything else?

0 Helpful

anthonyfear
Level 1
Level 1
In response to anthonyfear

‎07-06-2007 06:56 AM

debug ccsip all

attached

Preview file
6 KB
0 Helpful
Customers Also Viewed These Support Documents