cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
587
Views
0
Helpful
2
Replies

7940G and Expansion Module 7914

william_lithgow
Level 1
Level 1

The expansion Module 7914 can Work with IP Phone 7940G?

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi William,

Ajaz is correct :) Mant people have tried this setup over the past few years but it will not work. Have a look towards the end of this doc (I believe the 7914 is only compatible with 7960,7961,7970,7971);

http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a008066e11e.html

Hope this helps!

Rob

View solution in original post

2 Replies 2

AJAZ NAWAZ
Level 5
Level 5

according to this data sheet on the 7914, it would appear not to be supported.

hth,

Ajaz

Rob Huffman
Hall of Fame
Hall of Fame

Hi William,

Ajaz is correct :) Mant people have tried this setup over the past few years but it will not work. Have a look towards the end of this doc (I believe the 7914 is only compatible with 7960,7961,7970,7971);

http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a008066e11e.html

Hope this helps!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: