cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
377
Views
5
Helpful
3
Replies

Recommended Version Upgrades

rhickscisco
Level 1
Level 1

Howdy Folks,

I am currently running WCS 3.2.64.0. 3.2.171.6 and 3.2.150.6 is running on the Controllers. I want to upgrade to the latest "stable" versions. I see that people are/were having issues with 4.1.171.0. Since the 4.1.171.0-ER has been release are people still having problems?

What version is the community currently recommending?

Thanks,

Rick

3 Replies 3

da.beaver
Level 1
Level 1

Rick,

I have currently upgraded my controllers from the same versions you have. I was running 3.2.171.6 on the controllers and 3.2.64.0 on the WCS server for Windows. I had no issues upgrading the controllers to 4.0.217.0 which is the last of the 4.0 code, and very stable according to TAC. I am 6 weeks into it and everything is running fine. The WCS server went to 4.0.97.0 which is recommended when your controllers are at 4.0.217.0 and it is running better than ever.

I don't know about the 3.2.150.6 code. You may have to run that controller up to 3.2.171.6 prior to going to 4.0 code.

Here is a link to the upgrade path for the WLC's. Good luck with it.

http://www.cisco.com/en/US/partner/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml

Dave

4.0.97 on the WCS controller and 4.0.217.0 on the controllers.

I'm not touching it again since my spectralink phones now work along with the vocera, the laptops and everything else.

I am running 4.1.171.0 on my WLC4402s and 4.1.83.0 on WCS. Been up for about a month on each and no problems, I have a mix of older 1230's 1242's and 1510 mesh on the network, 60 access points. I like 4.1.83.0 on the WCS tons better, reporting, security alerts are all a lot better.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: