Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
409
Views
0
Helpful
2
Replies

BGP Vs Default Routes

Go to solution
rootadmin
Level 1
Level 1

‎07-05-2007 09:33 PM - edited ‎03-03-2019 05:44 PM

Hi,

Would like to know what is the AD as mentioned above.

Cheers

Mansur

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
guruprasadr
Level 7
Level 7

‎07-05-2007 10:21 PM

HI Mansur,

Pls refer to the below Link for Definition of AD & for the table lists the administrative distance default values of the protocols that Cisco supports.

http://www.cisco.com/warp/public/105/admin_distance.html#topic2

PLS Rate if HELPS

Best Regards,

Guru Prasad R

View solution in original post

0 Helpful
2 Replies 2

Go to solution
Amit Singh
Cisco Employee
Cisco Employee

‎07-05-2007 09:51 PM

Mansur,

The AD for External BGP is 20 and Internal BGP is 200. The AD for default route pointing towards the next hop ip is 1 and pointing towards the connected interface is 0.

http://www.cisco.com/warp/public/105/admin_distance.html

Is that what you are looking for...

HTH,Please rate if it does.

-amit singh

0 Helpful

Go to solution
guruprasadr
Level 7
Level 7

‎07-05-2007 10:21 PM

HI Mansur,

Pls refer to the below Link for Definition of AD & for the table lists the administrative distance default values of the protocols that Cisco supports.

http://www.cisco.com/warp/public/105/admin_distance.html#topic2

PLS Rate if HELPS

Best Regards,

Guru Prasad R

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card