2621 w/ NM-HDV

Arthur Kant · ‎07-06-2007

Hello all, I have a Cisco 2621 Router which I would like to put either a VIC-2FXS and/or a VIC-4FXS/DID into. I currently have a NM-HDV module in place.

Am I correct in my understanding that NM-HDV will not accept these cards? These will not work in the standard wic slots correct?

Thank you!

paolo bevilacqua · ‎07-06-2007

Hi,

look yourself into the guide:

http://cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml

To find out which cards work in which module or router, etc. For sure you can't put VIC cards in the 26xx WIC slots.

Hope this helps, please rate post if it does!

Arthur Kant · ‎07-09-2007

Thank you, I have seen the document referenced in the links provided and from what I can see the NM-HDV is only for T1/E1 VICS .. Can anyone confirm this for me?

Rob Huffman · ‎07-09-2007

Hi Arthur,

You are most correct here. Check out the 5th chart/table (26xx with NM-HDV) in this doc;

http://cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml#platform

Hope this helps!

Rob