07-06-2007 07:30 AM
Hello all, I have a Cisco 2621 Router which I would like to put either a VIC-2FXS and/or a VIC-4FXS/DID into. I currently have a NM-HDV module in place.
Am I correct in my understanding that NM-HDV will not accept these cards? These will not work in the standard wic slots correct?
Thank you!
07-06-2007 08:02 AM
Hi,
look yourself into the guide:
http://cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml
To find out which cards work in which module or router, etc. For sure you can't put VIC cards in the 26xx WIC slots.
Hope this helps, please rate post if it does!
07-09-2007 04:04 AM
Thank you, I have seen the document referenced in the links provided and from what I can see the NM-HDV is only for T1/E1 VICS .. Can anyone confirm this for me?
07-09-2007 05:28 AM
Hi Arthur,
You are most correct here. Check out the 5th chart/table (26xx with NM-HDV) in this doc;
http://cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml#platform
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: