07-06-2007 09:53 AM - edited 03-14-2019 10:26 PM
I get "error" when trying to update 7931G on the display, the phone keep rebooting couple of time before reverting to the built-in firmware.
built-in 7931G firmware:
term31.default
jar31sccp.8-1-0-90.sbn
cvm31sccp.8-1-0-90.sbn
cnu31.8-1-0-89.sbn
tnp.31.3-2-0-6.bin
dsp31.8-1-0-89.sbn
I am trying to load those file:
tftp-server flash:apps31.8-2-2ES1.sbn
tftp-server flash:cnu31.8-2-2ES1.sbn
tftp-server flash:cvm31sccp.8-2-2ES1.sbn
tftp-server flash:jar31sccp.8-2-2ES1.sbn
tftp-server flash:SCCP31.8-2-2SR1S.loads
tftp-server flash:term31.default.loads
telephony-service
load 7931 SCCP31.8-2-2SR1S
now i changed it for
load 7931 term31.default
(To keep the existing built-in firmware)
It does load all the file, but at the end the phone display "error" reset and retry to load them until it load with default firmware.
Am i missing something ? a file ? ...
Thanks !
Solved! Go to Solution.
07-10-2007 04:32 AM
Hi, I've recently upgraded a 7931 to SCCP31.8-2-2SR1S and there is no tnp file nor the phone request it during upgrade.
07-06-2007 12:13 PM
Yes, it seems to me you are missing dsp31.8-1-0-89.sbn in the tftp-server commands.
Also to not clutter too much the root directory in flash, I keep the formware files in a separate directory, eg:
tftp-server flash:/phoneloads/jar31sccp.8-2-0-55.sbn alias jar31sccp.8-2-0-55.sbn
Hope this helps, please rate post if it does!
07-10-2007 07:59 AM
Thanks !
I was missing the dsp31 file on the tftp-server.
07-10-2007 04:25 AM
Guys, my .tar file doesn't contain the tnp.31.3-2-0-6.bin file & I can't find it on Cisco (or Google) could anybody sent it to me? Rgds, Mick.S
07-10-2007 04:32 AM
Hi, I've recently upgraded a 7931 to SCCP31.8-2-2SR1S and there is no tnp file nor the phone request it during upgrade.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: