cant add t-1 to VWIC-2MFT-T1-DI

Unanswered Question
Jul 6th, 2007
User Badges:

i googled the error message but didnt find any useful information. any one ever had this issue before? i lowed the max sessions for conference and transcoding but with no luck. i also maxed out pvdm on the network module (NM-HDV)

EWT_NOC(config)#controller T1 1/1

EWT_NOC(config-controller)#channel-group 0 timeslots 1-24 speed 64

Channel setup failed!!! s:t:c 1:1:0

HDV slot 1 DRAM size 524280 free 66725 need 124992

%Insufficient resources to create channel group


thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gearnsc@smpltec... Fri, 07/06/2007 - 18:15
User Badges:

"HDV slot 1 DRAM size 524280 free 66725 need 124992 "

It appears that you don't have enough ram to allocate to the interface. Check to ensure SMARTinit is enabled. SMARTinit automatically adjusts interface memory allocations on router boot.

Router(config)#no memory-size iomem

Smart-init will be enabled upon reload.

If this doesn't solve the problem you'll probably need to buy additional RAM for your router.


This Discussion