07-06-2007 12:44 PM - edited 03-11-2019 03:41 AM
i have a Cisco asa5505 firewall running code 7.2. I uploaded the file (sslclient-win-1.1.3.173.pkg) into the disk0 without any problems, but when i issue "svc image disk0:/sslclient-win-1.1.3.173.pkg" i get an error message saying... ERROR: Not a valid SVC image - extraction failed. what am i missing? Is that not the right file/image?
-Thanks
07-07-2007 06:46 PM
assuming you have the tftp server running with this image try once more.
asa5500# copy tftp flash
Address or name of remote host []? ip of tftp
Source filename []? sslclient-win-1.1.3.173.pkg
Destination filename []? sslclient-win-1.1.3.173.pkg
07-08-2007 03:16 AM
Hi .. What you are doing is correct. It is most likely a corrupted image. For testing the image .. type the following command. If the image is OK, you should receive a similar output otherwise you might received an ERROR message which indicates the file is probably corrupted in which case I suggest downloading it again from Cisco
ASA505# show webvpn svc
1. disk0:/sslclient-win-1.1.3.173.pkg 1
CISCO STC win2k+ 1.0.0
1,1,3,173
Mon 12/11/2006 18:41:54.43
1 SSL VPN Client(s) installed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide