CSS 11501

cscarindam14 · ‎07-06-2007

we have a Cisco Content Services Switch model 11501 that load balances between 4 application servers. The credit card module a component of the application servers mysteriously stopped working. When we put a trace on the line we observed multiple transactions coming from an unknown device. The Mac Address is 00-13-c3-2a-43-ab. The Cisco Content Services switch has a Base Mac Address of 00-13-c3-2a-43-a8. I need to know what IOS command will identify which Mac address are assigned to which Ethernet port.

I would appreciate if somone could help me on this.

Thanks

b.petronio · ‎07-06-2007

Try the "show arp" m8.

or show arp ? for more options.

Is an Cisco IP Address for Sure.

MAC Address

Prefix Vendor

0013C3 Cisco Systems

http://www.coffer.com/mac_find/

Best Regards,

Petr?nio

cscarindam14 · ‎07-06-2007

Hi Thanks for yours prompt reply.

Is there any other IOS commands which helps us in this case?

cscarindam14 · ‎07-06-2007

Hi Petronio,

I just want to clarify it. Did you mean "show arp m8" ; just wanted to know whts this m8 all about.

Best Regards,

Arindam

b.petronio · ‎07-06-2007

Heheh, no

the "m8" is only a aberviation for "mate" .. ehhehe, and is not part of the command.

;)

b.petronio · ‎07-06-2007

I really dont know any other on CSS.

But, it doesnt identify the IP with "show arp" ?? In the last column it says on which port is seen.

Example:

CSS_2# show arp

ARP Resolution Table:

IP Address MAC Address Type Port

10.1.1.80 00-de-ad-be-ef-04 dynamic e9

10.1.1.90 00-de-ad-be-ef-05 dynamic e9

10.1.1.101 00-14-5e-1c-a8-f0 dynamic e9

10.1.1.110 00-0b-db-e7-a0-a0 dynamic e9

10.1.1.112 00-14-5e-7b-41-1c dynamic e9

10.1.1.120 00-14-5e-7b-41-24 dynamic e9

10.1.1.121 00-14-5e-7b-41-3c dynamic e9

10.1.1.122 00-14-5e-7b-41-1e dynamic e9

10.1.1.123 00-14-5e-7b-41-0c dynamic e9

10.1.1.124 00-14-5e-7b-41-3a dynamic e9

10.1.1.125 00-14-5e-1c-a9-3e dynamic e9

10.1.1.126 00-16-35-65-1d-e7 dynamic e9

10.1.1.174 00-0b-db-e7-93-35 dynamic e9

10.1.1.175 00-14-5e-c5-a0-40 dynamic e9

10.1.1.177 00-19-bb-3e-8b-ee dynamic e9

10.1.1.178 00-19-bb-33-88-46 dynamic e9

10.1.1.190 00-30-05-98-9c-c0 dynamic e9

10.1.1.191 00-1a-4b-4a-0e-46 dynamic e9

10.1.1.192 00-1a-4b-e5-85-3e dynamic e9

10.1.1.251 00-03-ba-06-e8-38 dynamic e9

10.1.1.252 00-03-ba-06-e4-64 dynamic e9

10.1.1.254 00-03-ba-06-e8-38 dynamic e9

10.1.2.1 00-1b-0c-82-ac-a5 dynamic e2

10.1.2.252 00-03-ba-06-e4-61 dynamic e1

10.1.2.253 00-03-ba-06-e8-35 dynamic e1

10.1.2.254 00-03-ba-06-e8-35 dynamic e1

With the "show chassis " command, u could sees the Base Mac Address of the equipment.

Best Regards,

Petr?nio

cscarindam14 · ‎07-06-2007

lolz sorry for "m8" confusion!! :)

Ah I guess this is what I was looking for. Will let you know if this really works out for me.

Thanks.

Best Regards,

Arindam

RODRGUTI · ‎07-14-2007

Hello,

If you want to know the mac addresses for the interfaces run this command:

CSS# show miibi

And if you need to know the mac address of the CSS, you can use this command:

CSS# llama

CSS(debug)# ip if

Hope this help.

- Rodrigo

cscarindam14 · ‎07-14-2007

Hello Rodrigo,

Could you please confirm the command again.

is it "show rniibi" ??

RODRGUTI · ‎07-16-2007

Hi,

Sorry, the command is:

CSS# show mibii.

-Rodrigo