Please Product No. for E1 ATM Module IMA

Unanswered Question
Jul 8th, 2007
User Badges:

I bought cisco router 2811 and I need E1 ATM Module card with IMA .

I got this prod. #

(( 4ports E1 ATM network Module with IMA ))

but it is supported on routers:





I need the exact Product No. for the same card which will be compatible with cisco 2811 .

Thank you for your help ..

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Sun, 07/08/2007 - 13:36
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member


For the new ISR routers, you do ATM IMA using VWIC cards and the AIM-ATM internal module. There is also a kit that contains both items, but I'm not sure if it is available as spare. Anyway the P/Ns are:

VWIC-xMFT-E1 (x = 1 or 2 ports)

or (either with will work)

VWIC2-xMFT-T1/E1 (x = 1 or 2 ports)



Hope this helps, please rate post if it does!

jay77jay77 Sun, 07/08/2007 - 18:59
User Badges:

AIM-ATM-1E1 is the package that can implement IMA but has only on E1 port.

If you go for AIM-ATM-4E1 u got 4 e1 ports.


husseinmuneer Mon, 07/16/2007 - 05:18
User Badges:

Dear p.bevilacqua ,

I bought the same card which you mentioned but now I have another problem .

The problem is that the IOS doesn't support that module so I installed it then I made sh run but I didn't see it .

The IOS which I have is :

IP Base


So if I have :

Advanced Enterprise Services



Advanced IP Services


Maybe the problem will be fixed but how can I get the IOS image because the resaller doesn't have it .

Thank you for your help .


This Discussion