cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
293
Views
0
Helpful
3
Replies

Please Product No. for E1 ATM Module IMA

husseinmuneer
Level 1
Level 1

I bought cisco router 2811 and I need E1 ATM Module card with IMA .

I got this prod. #

(( 4ports E1 ATM network Module with IMA ))

but it is supported on routers:

2600

3600

3700

3800

I need the exact Product No. for the same card which will be compatible with cisco 2811 .

Thank you for your help ..

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

Hi,

For the new ISR routers, you do ATM IMA using VWIC cards and the AIM-ATM internal module. There is also a kit that contains both items, but I'm not sure if it is available as spare. Anyway the P/Ns are:

VWIC-xMFT-E1 (x = 1 or 2 ports)

or (either with will work)

VWIC2-xMFT-T1/E1 (x = 1 or 2 ports)

and

AIM-ATM

Hope this helps, please rate post if it does!

AIM-ATM-1E1 is the package that can implement IMA but has only on E1 port.

If you go for AIM-ATM-4E1 u got 4 e1 ports.

Cheers!

Dear p.bevilacqua ,

I bought the same card which you mentioned but now I have another problem .

The problem is that the IOS doesn't support that module so I installed it then I made sh run but I didn't see it .

The IOS which I have is :

IP Base

c2811-ipbase-mz

So if I have :

Advanced Enterprise Services

c2811-adventerprisek9-mz

or

Advanced IP Services

c2811-advipservicesk9-mz

Maybe the problem will be fixed but how can I get the IOS image because the resaller doesn't have it .

Thank you for your help .

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco