Which router is best fit to my topolgy

Unanswered Question

Any body can help me which router is best fit to my network topology which has three fastethernet accroding to my network topology and which is going to place under core layer of my campus network which has not much traffics.In addition to this it has to have a NAT faction to have an internet connection with the external; system. In Addition to that the one that cost me low!!!!!!!!!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Paolo Bevilacqua Mon, 07/09/2007 - 00:56


do yo need wire-speed routing on the three fast-ethernet ? If so, the best would be a L3 switch like a 3560 or 3750 for this. Then for internet access you can use pretty much anything from the 871 and up.

Amit Singh Mon, 07/09/2007 - 00:57


After understading by your explanation that you need a very basic router with NAT support, 871 router should be fit in for your requirement.

Please see the datasheet below:


Please check the feature navigator link below for any specific feature support on the router:


HTH,Please rate if it does.

-amit singh


This Discussion