4500 IOS upgrade problem

Unanswered Question
Jul 9th, 2007
User Badges:

Trying to boot new image (cat4500-ipbasek9-mz.122-37.SG.bin) on Cat 4506 switches with WS-C4506 (XPC8245)Supervisor engines, via TFTP.


New image uploaded but when re-loaded failed to boot into new image cat4500-ipbasek9-mz.122-37.SG.bin


Console discovered switch trying to re-boot every 5 seconds

Went into ROMMON and instructed switch to boot from old image (cat4000-is-mz.121-12c.EW2.bin) to get back up & running.


Can anyone please advise?


Thanks in advance



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Richard Burts Mon, 07/09/2007 - 06:54
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Gary


There are several things that could cause the symptoms that you describe. It would help if you could post the console messages while the switch is attempting to boot. This would probably show much better what the problem is. Things that could cause these symptoms include:

- not enough memory available on the switch to run the new code.

- copy of the new image was flawed and the image is corrupt.

- image is not correct for this device.


So post the console messages and we will see what they tell us.


HTH


Rick

Actions

This Discussion