gearnsc@smpltec... Mon, 07/09/2007 - 07:02
User Badges:

You can setup 2 hsrp groups on the same interface


int fa0/0

ip address 10.1.1.251 255.255.255.0

ip address 10.1.2.251 255.255.255.0 secondary

standby 1 ip 10.1.1.254

standby 2 ip 10.1.2.254

Amit Singh Mon, 07/09/2007 - 07:13
User Badges:
  • Cisco Employee,

If you want to have HSRP for your routers, you have to have 1 interface on each router with one ip address in the same range and configure the multiple groups under that with the Virtual IP configured in the same range. You can also create secondry ip addresses and create the HSRP group for standby addresses.


Forexample :

Router 1:

ip address 192.168.1.1 255.255.255.0

ip address 192.168.2.1 255.255.255.0 secondary

standby 1 ip 192.168.1.100

standby 2 ip 192.168.2.100


Router 2:

ip address 192.168.2.2 255.255.255.0

ip address 192.168.1.2 255.255.255.0 secondary

standby 1 ip 192.168.1.100

standby 2 ip 192.168.2.100


The following link should help you in understanding it more clearly.


http://www.cisco.com/en/US/tech/tk1330/technologies_design_guide_chapter09186a008066670b.html


HTH,Please rate if it does.


-amit singh

Actions

This Discussion