Running H323 and SIP on the same cisco gateway

Unanswered Question
Jul 9th, 2007

Hi there!

I running Yate and Asterisk/IAX2 in the same box, to get H323 and convert to SIP, but I have a costumer that wants to send H323 with codec g723, but it doesn?t work good at all. So, can have H323 and SIP running on the same box like a c3600 or c2600?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Paolo Bevilacqua Tue, 07/10/2007 - 04:05

Yes, absolutely.

Note: if you want to show your customer something nice, show the PBX features of CME.

Hope this helps, please rate post if it does!

teodorgeorgiev Tue, 07/10/2007 - 04:19

I may go out of topic, but:

1. If you want reliable protocol (H323<-> SIP) and codec conversation and

2. If you wanto to show your cusotomer nice PBX features,

then go fo either MERA MVTS or Alterteks PSS softswitches.

Paolo Bevilacqua Tue, 07/10/2007 - 04:37


Do the products you mentioned a nice PBX for 30 users, 1 RU rugged unit without disk, hundreds of well documented features for voice, thousand of features for data integrated in the same box, for approx 1500 USD ?


This Discussion